The automatic rolling air filter purchased from a sewage plant in Renqiu, Hebei Province has been delivered – Automatic Roll Air Filter
The automatic rolling shutter filter purchased by a sewage plant in Renqiu, Hebei Province has been delivered
Equipment name: Automatic rolling shutter filter
Number of equipment: 1 set
Shipping date: February 18, 2022
Product introduction:
Automatic rolling shutter filter air volume: 11500m3/h 1 set, equipment size: 1250W*1800H*520D, equipment material: high-quality aluminum alloy profile, motor: Taibang special reduction motor, filter material: special G3 filter material for rolling shutter filter , supporting installation and fixing accessories. Control system: PLC time pressure difference automatic and manual control, passive dry contacts should be reserved for motor failure and filter material exhaustion alarms, and automatic replacement of filter cotton to reduce waste and save costs.
Working principle
It is mainly composed of filter material, filter material winding system and automatic control part. The new filter material is installed in the loading box. When the incoming air with high concentration of dust passes through the wound filter, the pressure difference between the front and rear of the filter gradually increases as the filtered dust increases. When the filter resistance rises to the set final resistance value, the differential pressure switch starts to act, and the winding system updates the filter material. When the differential pressure decreases, the transmission stops, the filter material update is completed, and filtration is resumed.
Material: cold rolled plate spraying, aluminum profile or SUS 304
//www.cloverfilter.com/wp-content/uploads/2025/01/27026035@DEB49525.DDDF1662.jpg.jpg” style=”width: 625px; height: 625px;” id=”img_insert_164566626814209304553679701686″ modifysize=”83%” diffpixels=”19px” scalingmode=”zoom”>
Control: manual, time/pressure difference control, PLC control
Filter material: Special mesh filter material, G3, G4 (EN779) efficiency
Installation: The finished product shipment site only needs to be powered on to operate. If the on-site installation space is limited,
Can be packed and shipped in pieces, and can be flexibly assembled and formed upon arrival at the site
